13
1
2
START TUMBLE DRYING
Press the button.
The text
at the lower edge of the dis-
play indicates that the program has started. The
text field of the display shows the current stage
of the program while it is in progress.
PUTTING IN MORE WASHING
Open the door and the drum will stop
automatically. To restart: Close the door and
press the button.
CHANGING THE PROGRAM
Press the button for three seconds. The
program will then be zero set and you can choose
a new program.
AFTER TUMBLE DRYING
• Turn off the main switch.
• Clean the lint filter after each drying opera-
tion, see below. An error message will be dis-
played if the lint filter needs to be cleaned.
WARNING!
If the lint filter becomes completely clogged
the overheat protection device may trigger. The
device must then be reset to enable the machi-
ne to be started, see Chapter 12, Trouble shoo-
ting.
CLEANING THE LINT FILTER
1. Grasp the filter handle and pull towards you.
2. Pull the filter up out
of the holder.
3. Open the filter
and brush away the
lint with your hand.
4. Fold the filter together and put it back in the
filter holder.
To Next Page
Loading...
