Model W600
(WM-33)
Date
2000-02
Page
2
PROGRAMS
THE CONTROL PANEL
Program Recommended Temp.
Number Program Types of Laundry Range (° F)
1 White cotton w/prewash For heavily soiled cotton 140–205
2 White cotton w/short prewash For normally soiled cotton 140–205
3 Normal For lightly soiled cottons & colorfast fabrics 105–140
4 Rinse
5 Long spin
6 Permanent Press/Synthetics For acrylic, polyester 105–140
7 Super quick wash For lightly soiled fabrics 85–105
8 Short spin
9 Wool/Hand wash For silk, nylon, washable wool 85–105
10 Drain
CAUTION!
Some fabrics may not be able to withstand extremely hot temperatures.
Please refer to the Recommended Wash Temperatures chart in the Use and
Care Guide.
PROGRAMS
Your ASKO washer has several programs and options specifically designed to give you the cleanest
laundry possible. The tables below define each program and option. The C and S on the Program Control
are fault codes, which are explained on the next page.
Power Button
The Power button turns the power to the machine on and off. When the power is on, the power
indicator light glows red. The power must be on before you can open the door, set the programs
or start the machine.
Door Open Button
The power must be on and you must press this button to open the door. There will be a few seconds
delay before the door opens. Please note that the Program Control knob must be at the end of a
program (at a red mark) to open the glass door. (See also, “Interrupting or Changing a Program”
on the next page.)
For instructions on how to open the door manually in case of power failure, refer to the Use and Care Guide.
800
65
85
105
120
140
160
170
0
205
10
1
2
3
4
5
7
9
8
6
C
S
E
2
Door Open Button
Press to open the glass door. Please note
that the Program Control knob must be at
the end of a program (at a red mark) to open
the glass door.
Super Rinse Button
Press to program
seven rinses.
Economy Button
Press to extend the wash time
by 22 minutes. (Suggested for
use only with the low wash
temperatures.)
Power Button
Press to turn on power
to the machine.
Program Control
Turn clockwise to
select a program.
Power Indicator Light
Glows when the
power is turned on.
Temperature Control
Turn clockwise to set the
wash temperature.
800 RPM Spin Button
Press to reduce spin
speed from 1000 rpm to
800 rpm.
No Spin Button
Press to omit the
spin cycles.