Asko W6324W - Program Completion and Door Opening; Deactivating Automatic Door Opening; Changing Automatic Door Opening Setting

19
Customer Care Center
1-800-898-1879
www.askona.com
Operating instructions
8
Once the program has
nished
Once the program has nished, all six
LEDs around Start/Stop and the Door Opening
button light up for 2 minutes. The machine then
turns o.
The washer door opens automatically once the
program has nished. If you want to deactivate
the Automatic Door Opening function, see the
"Selecting settings" section.
• Remove the laundry.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
You can change the following
settings:
Automatic Door Opening.
Door opening
If you choose Automatic Door Opening, the washer
door will open once the program has nished.
1. Turn o the machine using the main power
switch.
2. Press and hold the Super Rinse button and
then switch on the main power switch.
3. If the LEDs around the Door Opening button
light, automatic door opening is activated. If the
LEDs do not light, the setting is not activated.
4. Press the Super Rinse button to change the
setting.
5. Press the Door Opening button to save the
setting.