High Water Level
1. High Water Level means additional water is used during the main wash and rinse cycles.
Select High Water Level by pressing the program selector (the big arrow) until the High Water
Level symbol is highlighted.
Note!
The machine takes in the additional water for High Water Level about 15 minutes after the
main wash has started.
2. You cannot choose this option with the Auto, Time, Wool, Delicate/Hand, Rinse, Drain, or
Spin programs.
3. Press the up arrow button to choose High Water Level or the down arrow to choose Normal
Water Level.
4. Press the Start/Stop button to start the program or press the program selector (the big arrow)
again to choose more options.
Delayed Start
1. When you select Delayed Start, the machine will start 1-24 hours after you press the Start/Stop
button. Select Delayed Start by pressing the program selector (the big arrow) until the clock
symbol is highlighted and the current start and end times appear on the right of the display.
2. This option cannot be used with the Time program.
3. Each time you press the arrow buttons you add half an hour to the time up to a maximum of
24 hours.
Important!
Remember to press the Start/Stop button to start the program.
Customer Care Center24
1-800-898-1879
www.askousa.com
Selecting Options
To Next Page
Loading...
