Using a travel adapter:
Install the battery into the mobile phone before charging the battery.
Connect the adapter of the travel charger with the charging port on the left side of the mobile phone.
Ensure that the adapter is fully inserted.
Insert the plug of the travel charger to an appropriate power outlet.
During the charging, the battery level grids in the battery icon keep flickering till the battery is fully
The battery icon will no longer flicker when the charging process is complete.
Using the Charging cradle:
Plug the charge cable to the back of cradle, a steady Green light will appear under “Aspera”
Close the F28 flip and place it in the cradle to charge, the green light will turn to Red while charging.
Once the charge is full the indicator light will turn Green.
Please be advised it’s normal for the light to switch between Red and Green. It means the phone is charging.
Note:
Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are inserted in
the right direction. Inserting them in a wrong direction may cause charging failure or other problems.
Before charging, ensure that the standard voltage and frequency of the local mains supply match the rated
voltage and power of the travel charger.
Using the Battery
The performance of a battery is subject to multiple factors: radio network configuration, signal strength,
ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application
mode you choose to use.
To Next Page
Loading...
