-
16
-
symbol on it. A power-on animation appears on the display screen.
Input the phone lock code and press the ok key if the mobile phone prompts you to input the phone lock code.
The original code is 0000.
Input the PIN and press the ok key if the mobile phone prompts you to input the PIN. The PIN is provided by
the network operator for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the End call key for a few seconds.
3.5 Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically searches
for an available network. After finding a network, the mobile phone enters the standby state. When the
mobile phone is registered on the network, the name of the network operator is displayed on the screen. Then
you can dial or receive a call.
In the standby interface, press number keys to input the area code and the telephone number, and then press
the green Dial key to dial a call. To end the call, press the red End key.
Dialing an international call
Press the * key twice to input "+". Then input the country code, the area code and the telephone number.
Finally, press the green Dial key.
Dialing to a number in the phonebook
Enter the phonebook and use the up or down direction keys to find the telephone number you want to call.
Press the green Dial key. The mobile phone automatically dials the chosen telephone number.
You can access the phone book directly by pressing the down arrow key. You can enter the first letter of the
To Next Page
Loading...
