An SD card is a pluggable mobile storage card inside the mobile phone.
To install an SD card, insert the card into the card slot under the back cover, left of the SOS button. To
remove the SD card, push down on the lock catch and slide the card out.
Note:
1. The mobile phone cannot automatically identify the SD card being inserted when the mobile phone is
powered on. You must power off the mobile phone and then power it on, so that the phone can identify the SD
card.
2. The SD card is a miniature object. Keep it out of the reach of small children for fear that they may swallow
it.
The lithium-ion battery delivered with the mobile phone can be put into use immediately after being
unpacked.
Battery level indication:
Your mobile phone can monitor and display the battery state.
Normally the remaining energy of the battery is indicated by the battery level icon at the upper right
corner of the display screen.
When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have set an alert
tone, an alert tone will be given off when the battery level is too low.
A charging animation appears when the battery is being charged. When the charging is complete, the
To Next Page
Loading...
