-
30
-
Changing the ringtone
To change the ringtone, go to settings->user profile and click on the highlighted profile, the default is General.
Click the General option. Press the left soft key to bring up the options. Click on customize. You can now
change the alert type, ring type and the actual ring tone. Change the tone under the “incoming” section. When
done click Options again and then select Save to make the changes permanent.
Turning the phone to silent
Go to menu ->settings ->user profiles ->silent.
Call settings
Caller ID: You can choose to send your own number when making a call, or to hide your number. Select
Caller ID then click Hide ID or Send ID then click OK to save the change.
Call waiting: After you choose Activate, the mobile phone will contact the network. A moment later, the
network will make a response and send a message to acknowledge your operation. If the call waiting function
is activated, the network will alert you and the mobile phone screen will display the incoming call number if
others are calling you while you are already in a conversation.
Call divert: this network function enables you to forward incoming calls to another number you have
previously specified.
Call barring: The call barring function enables you to bar calls as needed. When setting this function, you
need to use a network barring code, which can be obtained from the network operator. If the code is wrong,
To Next Page
Loading...
