-
31
-
an error message will be prompted on the screen. After selecting a call barring option, continue to select
Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then contact the
network. A moment later, the network will make a response and send the operation results to the mobile
phone.
Group list
：
You can add, delete or edit the list in this function.
Blacklist: Blacklist is used to block certain numbers from calling your phone. Note: blacklisted numbers will
still be able to message you. To add a person onto your blacklist. Go to phonebook and select a contact. Press
the left soft key to bring up options. Select “Add to black list.”
Whitelist: Stored in the phone number in this list, to the highest priority
Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the mobile
phone will automatically re-dial the number a moment later if the called party does not reply. The number of
auto redial times can be set to a maximum of 10. In the auto re-dial period, you cannot dial other numbers. To
end the auto-re-dial process, press the End key.
Note: This function requires support from the network operator to which the SIM card is registered.
Call time reminder: You can set it as On or Off. And set single or circle tone in a call to make you know the
time.
Auto quick end: You can set ON/ OFF, and set a time (1~9999s) as your desire.
Reject by SMS: Reject an incoming call and reply the caller a short message.
Answer mode: Select an answer mode as per your need. This will determine if calls are answered when
opening the flip or after opening the flip and pressing answer.
To Next Page
Loading...
