Aspes ACE1110B - User Manual

Questions and Answers

J
Justin WyattAug 18, 2025
What does error code EA mean on Aspes ACE1110B?
- K
  Katherine JimenezAug 18, 2025
  If your Aspes Water Heater shows error code EA, it means there is no flame detected.
B
bennettamberAug 21, 2025
What does it mean when my Aspes ACE1110B shows error E2?
- M
  Molly HernandezAug 21, 2025
  If your Aspes Water Heater displays error code E2, it indicates that the inlet temperature sensor is defective.
S
Scott NortonAug 23, 2025
What causes error code CF on an Aspes ACE1110B Water Heater?
- N
  Nicholas SantiagoAug 23, 2025
  The Aspes Water Heater displays error code CF when there is an exhaust blockage.
J
Joshua ThomasAug 26, 2025
What does error code A0 mean on Aspes ACE1110B?
- S
  Stephen DiazAug 26, 2025
  If the Aspes Water Heater displays error code A0, it indicates a temperature sensor error.
S
Sarah GalvanAug 28, 2025
Why does my Aspes ACE1110B Water Heater show error code E7?
- G
  Gail PhillipsAug 28, 2025
  The Aspes Water Heater displays error code E7 when there is a wrong flame signal.
D
Donald RochaAug 30, 2025
What does error code FA on my Aspes ACE1110B Water Heater indicate?
- D
  David BrownAug 30, 2025
  If the Aspes Water Heater displays error code FA, it indicates a gas valve leakage.
D
Dr. Jonathan Clark MDSep 1, 2025
What does error code EE mean on an Aspes Water Heater?
- E
  Erika GarciaSep 1, 2025
  The Aspes Water Heater displays error code EE when there is a gas valve connection error.
M
Melinda BrewerSep 4, 2025
Why is my Aspes ACE1110B Water Heater showing error code EC?
- D
  David BellSep 4, 2025
  If your Aspes Water Heater displays error code EC, it means there is no flame signal.
S
spencernicholasSep 6, 2025
What does error code E9 mean on Aspes ACE1110B?
- S
  Shane KellySep 6, 2025
  If the Aspes Water Heater is displaying error code E9, it means there is a thermostat error.
R
rheathSep 8, 2025
What does it mean when my Aspes ACE1110B Water Heater shows error code CA?
- M
  Megan CollinsSep 8, 2025
  The Aspes Water Heater displays error code CA when the water flow exceeds the maximum value.