19
WARNING
To use hot water again after stop, do not let the hot water splash you, because the water
temperature in the unit might be very high. Use it after several seconds of hot water outflow
to avoid scald.
!
Ani-frozen water supply method:
Not only the main body, but also the cold/hot water pipes and valves can be protected from freezing.
When there is a line controller, the ON/OFF key of the line controller shall be at the OFF position before
you proceed with the following operations.
●
Close the water outlet valve, the unit will stop automatically.
①
Close the gas valve.
Close the gas valve.
water outlet valve
water inlet valve
①
Open the water outlet valve (the water inlet valve is semi-open).
②
②
③
④
⑤
Press the ON/OFF key on the operation panel.
Close the water inlet valve.
Close the main gas switch.
Switch off the power switch or pull out the power supply plug.
4.3 Stop To Use
4.4 Anti-frozen Treatment Of The Unit
To Next Page
Loading...
