EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32
42 43
English
PCIE Slot 7 Link Width
is allows you to select PCIE7 Link Width. e default value is [x16].
PCIE1 Link Speed
is allows you to select PCIE1 Link Speed. e default value is [Auto].
PCIE2 Link Speed
is allows you to select PCIE2 Link Speed. e default value is [Auto].
PCIE3 Link Speed
is allows you to select PCIE3 Link Speed. e default value is [Auto].
PCIE4 Link Speed
is allows you to select PCIE4 Link Speed. e default value is [Auto].
PCIE5 Link Speed
is allows you to select PCIE5 Link Speed. e default value is [Auto].
PCIE6 Link Speed
is allows you to select PCIE6 Link Speed. e default value is [Auto].
PCIE7 Link Speed
is allows you to select PCIE7 Link Speed. e default value is [Auto].
Above 4G Decoding
Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if
the system supports 64 bit PCI decoding)
SR-IOV Support
If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single Root IO
Virtualization Support.
Restore AC Power Loss
is allows you to set the power state aer a power failure. If [Power O] is selected, the
power will remain o when the power recovers. If [Power On] is selected, the system will
start to boot up when the power recovers.
To Next Page
Loading...
Need help?
General
