38
CPU Voltage
It allows you to adjust the value of CPU voltage. However, for safety and
system stability, it is not recommended to adjust the value of this item.
GFX Engine Clock
Use this to adjust graphics engine clock. The default value is [Auto].
DRAM Frequency
inserted and assigns appropriate frequency automatically.
DRAM Timing Control
Power Down Enable
Use this item to enable or disable DDR power down mode.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
Channel Interleaving
-
tions: [Disabled], [Auto]. The default value is [Auto].
CAS# Latency (tCL)
default is [Auto].
RAS# to CAS# Delay (tRCD)
The default is [Auto].
To Next Page
Loading...
