39
Row Precharge Time (tRP)
The default is [Auto].
RAS# Active Time (tRAS)
The default is [Auto].
Command Rate (CR)
1T. Max: 2T. The default is [Auto].
RAS# Cycle Time (tRC)
default is [Auto].
Write Recovery Time (tWR)
The default is [Auto].
Refresh Cyle Time (tRFC)
The default is [Auto].
RAS to RAS Delay (tRRD)
The default is [Auto].
Write to Read Delay (tWTR)
The default is [Auto].
Read to Precharge (tRTP)
The default is [Auto].
Four Activate Window (tFAW)
setting. The default is [Auto].
Voltage Control
DRAM Voltage
Use this to select DRAM Voltage. The default value is [Auto].
NB Voltage
Use this to select NB Voltage. The default value is [Auto].
SB Voltage
Use this to select SB Voltage. The default value is [Auto].
To Next Page
Loading...
