ASROCK D1540D4U-2L+ - 3 Rd Storage Configuration

60
61
English
3.3.8 3rd Storage Conguration
In this section, you may set the congurations or see the information of the connected 3rd
storage device.
Marvell 9172 Controller
Enable or disable Marvell 9172 Controller.
Marvell 9172 Operation Mode
is item is for M_SATA ports. Use this to select Marvell SATA operation mode.
Conguration options: [IDE Mode] and [AHCI Mode] . e default value is [AHCI Mode].
Bootable Marvell 9172 SATA3
We recommend to use Intel SATA ports (Port 0~5) for your bootable devices. is will
minimize your boot time and get the best performance. If you still want to boot from
Marvell SATA3 controller, please set this item to Yes.
Bootable LSI 3008 Controller
Use this item to enable or disable Bootable LSI Controller.