FM2A58M-VG3+ R2.0
41
English
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
Processor Maximum Voltage
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust
recommended to keep the default value for system stability.
Boost Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value
of this item.
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value
of this item.
Voltage Control Mode
Use this to control voltage mode.
CPU Voltage
It allows you to adjust the value of CPU voltage. However, for safety and
system stability, it is not recommended to adjust the value of this item.
CPU Voltage Offset
It allows you to adjust the value of CPU voltage offset. However, for safety
and system stability, it is not recommended to adjust the value of this item.
CPU NB Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value
of this item.
APU Load-line Calibration
APU Load-line Calibration helps prevent APU voltage droop when the
system is under heavy load.
GFX Engine Clock
Use this to adjust GFX Engine Clock. The default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically.
To Next Page
Loading...
Need help?
General
