EasyManuals Logo
Home>ASROCK>Motherboard>G41C-VS

ASROCK G41C-VS User Manual

ASROCK G41C-VS
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
1212
1212
12
Chapter 2 InstallationChapter 2 Installation
Chapter 2 InstallationChapter 2 Installation
Chapter 2 Installation
G41C-VS is a Micro ATX form factor (8.8" x 7.8", 22.4 x 19.8 cm) motherboard.
Before you install the motherboard, study the configuration of your chassis to en-
sure that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause physical injuries to you and
damages to motherboard components.
2.1 Screw Holes2.1 Screw Holes
2.1 Screw Holes2.1 Screw Holes
2.1 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
2.2 Pre-installation Precautions2.2 Pre-installation Precautions
2.2 Pre-installation Precautions2.2 Pre-installation Precautions
2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.

Other manuals for ASROCK G41C-VS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASROCK G41C-VS and is the answer not in the manual?

ASROCK G41C-VS Specifications

General IconGeneral
Non-ECCYes
Number of memory slots4
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
Number of SATA connectors2
ATX Power connector (24-pin)No
Number of Parallel ATA connectors1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Audio chipRealtek ALC662
CertificationFCC, CE, EuP Ready
Power source typeATX
Audio output channels5.1 channels
Motherboard form factormicro ATX
Networking features10/100 Mbps
BIOS memory size64 Mbit
Weight and Dimensions IconWeight and Dimensions
Depth198 mm
Width224 mm

Related product manuals