ASROCK G41C-VS - Page 38

3838
3838
38
DRAM CH1 CMD SKEW
This controls the number of DRAM CH1 CMD SKEW. The default value is
[Auto].
DRAM CH1 CTRL0 SKEW
This controls the number of DRAM CH1 CTRL0 SKEW. The default value is
[Auto].
DRAM CH1 CTRL1 SKEW
This controls the number of DRAM CH1 CTRL1 SKEW. The default value is
[Auto].
DRAM CH1 CTRL2 SKEW
This controls the number of DRAM CH1 CTRL2 SKEW. The default value is
[Auto].
DRAM CH1 CTRL3 SKEW
This controls the number of DRAM CH1 CTRL3 SKEW. The default value is
[Auto].