56
3.5 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.
CPU Fan Setting
This allows you to set the CPU fan speed. Confi guration options: [Full On]
and [Automatic Mode]. The default is value [Full On].
Chassis Fan 1 Setting
This allows you to set the chassis fan 1 speed. Confi guration options: [Full
On] and [Automatic Mode]. The default is value [Full On].
Target Temperature
The target temperature will be between 45
o
C/113
o
F and 65
o
C/149
o
F.
The default value is [50
o
C/122
o
F].
Target Fan Speed
Use this option to set the target fan speed. You can freely adjust the
target fan speed according to the target temperature that you choose.
Confi guration options: [Level 1], [Level 2], [Level 3], [Level 4], [Level 5],
[Level 6] [Level 7], [Level 8] and [Level 9].
To Next Page
Loading...
Need help?
General
