ASROCK K7VM3 - Appendix; Advanced Menu

23
Appendix: Advanced BIOS Setup
This section will introduce you the following BIOS Setup menus: “Advanced,”
“Security,” “Power,” “Boot,” and “Exit.”
1. Advanced BIOS Setup Menu
Spread Spectrum:
This field should always be [Disabled] for better system stability.
CPU Host Frequency:
[Auto]: It is recommended to select this option, which will let the CPU
host frequency of this motherboard determined by the jumper-setting.
[Manual]: This allows user to set the CPU host frequency manually. However,
this is not recommended unless user thoroughly knows the feature.
Wrong setup may cause problems during operation.
DRAM Frequency:
If set to [Auto], the motherboard will detect the inserted memory module(s) and
automatically assign appropriate frequency. You may select other value as
operating frequency: [100MHz (DDR200)],[133MHz (DDR266)],
[166MHz (DDR333)].
Flexibility Option:
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
AMIBIOS SETUP UTILITY - VERSION 3.31a
Main
Advanced
Security
Power
Boot
Exit
Spread Spectrum
Configuration
Configuration
CPU Host Frequency
Actual Frequency
DRAM Frequency
Flexibility Option
Chipset Configuration
Resource
Peripheral
System Hardware Monitor
[ Setup Help ]
Auto
133MHz
Auto
Disabled
<Enter> to enable or
disable the feature of
spread spectrum.
F1:Help
Esc:Exit
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
:Select Menu
Disabled