1212
1212
12
To enable Multi-Streaming function, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on
your system. Please follow below instructions according to the OS you install.
For Windows
®
XP / XP 64-bit OS:
Please click “VIA HD Audio Deck” icon. Click “Jack” and then click “Configuration”. In
“Configuration” screen, please check the item “Independent Headphone”.
For Windows
®
7 / 7 64-bit / Vista
TM
/ Vista
TM
64-bit OS:
Please click “VIA HD Audio Deck” icon. Click “Advanced Options” on the right side on the
bottom. In “Advanced Options” screen, please check the item “Independent Headphone”.
*** Due to chipset limitation, the powered eSATAII function can work in RAID / AHCI mode
only.
If you want to install Windows
®
XP / XP 64-bit in RAID / AHCI mode, please make a SATA
driver diskette first. You may refer to our user manual in the support CD or the quick
installation guide for the detail steps of making a SATA driver diskette.
If you want to install Windows
®
7 / 7 64-bit / Vista
TM
64-bit / Vista
TM
in RAID / AHCI mode,
please install the OS directly, and you can enjoy the benefit of powered eSATAII function.
To Next Page
Loading...
Need help?
General
