EasyManuals Logo

ASROCK M3N78D - V1.0 User Manual

ASROCK M3N78D - V1.0
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
3636
3636
36
3.33.3
3.33.3
3.3
OC TOC T
OC TOC T
OC T
weakweak
weakweak
weak
er Screener Screen
er Screener Screen
er Screen
In the OC Tweaker screen, you can set up overclocking features.
BIOS SETUP UTILITY
Main
Advanced H/W Monitor Boot Security Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
CPU Configuration
CPU Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[Auto]
CPU/LDT Spread Spectrum
SATA
Boot Failure Guard
NVIDIA Core Calibration
CPU Active Core Control
Spread Spectrum
Processor Maximum Frequency
North Bridge
Processor Maximum Voltage
Maximum Frequency
x15.0 3000 MHZ
x10.0 20
1.3000 V
00 MHz
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[All Cores]
Multiplier/Voltage Change
HT Bus Speed
HT Bus Width
CPU Thermal Throttle
[Auto]
[Auto]
[Auto]
[Enabled]
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
CPU/LDT Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options:
[Disabled] and [Enabled].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
NVIDIA Core Calibration
Setting this item to [All Cores] or [Per Core] will enhance the overclocking
ability of the processor. Configuration options: [Disabled], [Auto], [All Cores]
and [Per Core]. The default value is [Disabled].
CPU Active Core Control
This allows you to adjust CPU Active Core Control feature. The configura-
tion options depend on the CPU core you adopt. The default value is [All
Cores].

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASROCK M3N78D - V1.0 and is the answer not in the manual?

ASROCK M3N78D - V1.0 Specifications

General IconGeneral
BrandASROCK
ModelM3N78D - V1.0
CategoryMotherboard
LanguageEnglish

Related product manuals