3030
3030
30
BIOS SETUP UTILITY
CPU Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Cool ‘n’ Quiet
[Auto]
Secure Virtual Machine
Enhanced Halt State (C1E)
[Enabled]
[Disabled]
Enabling this function
may reduce CPU voltage
andmemoryfreq.,and
lead to system
stability or
compatibility issue
with some memory
modules or power
supplies. Please set
this item to [Disabled]
if above issue occurs.
3.4.13.4.1
3.4.13.4.1
3.4.1
CPU ConfigurationCPU Configuration
CPU ConfigurationCPU Configuration
CPU Configuration
Cool ‘n’ Quiet
Use this item to enable or disable AMD’s Cool ‘n’ Quiet
TM
technology. The
default value is [Auto]. Configuration options: [Auto], [Enabled] and
[Disabled]. If you install Windows
®
10 / 8.1 / 8 / 7 / Vista
TM
and want to enable
this function, please set this item to [Enabled]. Please note that enabling this
function may reduce CPU voltage and memory frequency, and lead to system
stability or compatibility issue with some memory modules or power supplies.
Please set this item to [Disable] if above issue occurs.
Secure Virtual Machine
When this option is set to [Enabled], a VMM (Virtual Machine Architecture)
can utilize the additional hardware capabilities provided by AMD-V. The default
value is [Enabled]. Configuration options: [Enabled] and [Disabled].
Enhance Halt State (C1E)
All processors support the Halt State (C1). The C1 state is supported through
the native processor instructions HLT and MWAIT and requires no hardware
support from the chipset. In the C1 power state, the processor maintains the
context of the system caches.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
