Need help?Do you have a question about the ASROCK N68C-GS FX and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 4 |
| Supported memory types | DDR2-SDRAM, DDR3-SDRAM |
| Maximum internal memory | 8 GB |
| Supported memory clock speeds | 533, 667, 800, 1066, 1333, 1600 MHz |
| System bus rate | 2 GT/s |
| Processor socket | Socket AM3+ |
| Processor manufacturer | AMD |
| Compatible processor series | AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6 |
| Maximum number of SMP processors | 1 |
| Processor system buses supported | 1000 MHz |
| USB 2.0 connectors | 3 |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | 0 |
| PS/2 ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Certification | FCC, CE, WHQL |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | NVIDIA nForce 630a |
| Audio output channels | 5.1 channels |
| Motherboard form factor | micro ATX |
| Motherboard chipset family | NVIDIA |
| RAID levels | 0, 1, 0+1, 5, JBOD |
| Supported storage drive interfaces | SATA II |
| Graphics card | GeForce 7025 |
| Maximum graphics card memory | 256 MB |
| Parallel processing technology support | - |
| Cables included | SATA |
| LAN controller | Realtek RTL8211CL |
| Ethernet interface type | Gigabit Ethernet |
| BIOS type | AMI |
| ACPI version | 1.1 |
| BIOS memory size | 8 Mbit |
Weight and Dimensions| Depth | 208 mm |
|---|---|
| Width | 244 mm |
Important safety and handling guidelines before installing motherboard components.
Instructions for installing the CPU, fan, and heatsink for proper operation.
Guide for installing DDR2/DDR3 DIMMs and configuring dual channel memory.
Guidance on connecting ATX power connectors for system power.
Settings for CPU features like Cool 'n' Quiet, Secure Virtual Machine, and Thermal Throttle.
Settings for IDE and SATA controllers, including SATA Operation Mode.
Monitor system hardware status: CPU temp, fan speed, voltages, etc.
To Next Page
