59
3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.
CPU Fan 1 & 2 Setting
This allows you to set the CPU fan 1 & 2 speed. Confi guration options: [Full
On] and [Automatic Mode]. The default is value [Full On].
Chassis Fan 1 Setting
This allows you to set the chassis fan 1 speed. Confi guration options:
[Full On], [Automatic Mode] and [Manual Mode]. The default is value [Full
On].
Chassis Fan 2 Setting
This allows you to set the chassis fan 2 speed. Confi guration options:
[Level 1] to [Level 4]. The default is value [Level 4].
Chassis Fan 3 Setting
This allows you to set the chassis fan 3 speed. Confi guration options:
[Full On] and [Manual Mode]. The default is value [Full On].
To Next Page
Loading...
