EasyManuals Logo

ASROCK Z370M-ITX/ac User Manual

ASROCK Z370M-ITX/ac
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
22
23
English
2.6 Onboard Headers and Connectors
System Panel Header
(9-pin PANEL1)
(see p.1, No. 12)
GNDRESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
Connect the power
switch, reset switch and
system status indicator on
the chassis to this header
according to the pin
assignments below. Note
the positive and negative
pins before connecting
the cables.
PWRBTN (Power Switch):
Connect to the power switch on the chassis front panel. You may congure the way to turn
o your system using the power switch.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset switch to restart the
computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. e LED is on when the
system is operating. e LED keeps blinking when the system is in S1/S3 sleep state. e
LED is o when the system is in S4 sleep state or powered o (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. e LED is on when the
hard drive is reading or writing data.
e front panel design may dier by chassis. A front panel module mainly consists of power
switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connect-
ing your chassis front panel module to this header, make sure the wire assignments and the
pin assignments are matched correctly.
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASROCK Z370M-ITX/ac and is the answer not in the manual?

ASROCK Z370M-ITX/ac Specifications

General IconGeneral
ECCNo
Memory channelsDual-channel
Memory slots typeDIMM
Unbuffered memoryYes
Number of memory slots2
Supported memory typesDDR4-SDRAM
Maximum internal memory32 GB
Supported memory clock speeds2133, 4000 MHz
RAID levels0, 1, 5, 10
Supported storage drive typesHDD & SSD
Supported storage drive interfacesM.2, SATA III
Audio chipRealtek ALC892
Cooling typePassive
Component forPC
Power source typeATX
Motherboard chipsetIntel® Z370
PC health monitoringCPU, FAN, Power supply, Temperature, Voltage
Audio output channels7.1 channels
Motherboard form factormini ITX
Motherboard chipset familyIntel
Processor socketLGA 1151 (Socket H4)
Compatible processor seriesIntel Core i3, Intel Core i5, Intel Core i7
Maximum number of SMP processors1
Maximum resolution4096 x 2304 pixels
Parallel processing technology supportNot supported
Number of SATA connectors6
USB 3.2 Gen 2 (3.1 Gen 2) connectors0
BIOS typeUEFI
ACPI version6.0
BIOS memory size16 Mbit
System Management BIOS (SMBIOS) version2.7
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
LAN controllerIntel I211-AT, Intel I219V
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Ethernet interface typeGigabit Ethernet
Cables includedSATA
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth- mm
Width170 mm

Related product manuals