74
English
P-Core PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
E-Core PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Ring PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
System Agent PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Memory Controller PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
GT PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
AVX Conguration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00
will decrease the voltage guardband.
FIVR Conguration
P-Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode,
the voltage is interpolated only in turbo mode.
82 / 113