ASROCK Z690M PG Riptide/D5 - Page 85

77
English
Z690M PG Riptide/D5
System Agent Voltage Oset
Species the Oset Voltage applied to the Uncore domain. is voltage is specied
in millivolts.
Oset Prex
Sets the oset value as positive or negative.
Save User Default
Type a prole name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Prole to Disk
It helps you to save current UEFI settings as an user prole to disk.
Load User UEFI Setup Prole from Disk
You can load previous saved prole from the disk.
85 / 113