690F & 691F
(Fail Safe/Fail Secure) Series
Heavy Duty Electric Trim Control (E.T.C.)
Installation Instructions With ElectroLynx Connector System
Attention Installer: Any retrofi t or other fi eld modifi cation to a fi re rated opening can potentially impact the fi re rating of the
opening, and ASSA ABLOY makes no representations or warranties concerning what such impact may be in any specifi c
situation. When retrofi tting any portion of an existing fi re-rated opening, or specifying and installing a new fi re-rated opening,
please consult with a code specialist or local code offi cial (Authority Having Jurisdiction) to ensure compliance with all appli-
cable codes and ratings.
WARNING
80-8470-0690-000 04/24
1-855-557-5078 Ext. 2 • www.accentra-assaabloy.com
Copyright © 2002, 2013, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is
prohibited.
WARNING
This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65warnings.ca.gov.
®
Rim Cylinder
(May be supplied by others)
Tailpiece
(690) FAIL SAFE SHOWN)
(2) #14 Finishing Washer
(2) Cylinder
Mounting Screws
Supplied with cylinder.
1/4-20 x 1-1/4" Oval Head
Machine Screw
Others: As Ordered
(2 Studs Toward Hinge)
1/4-20 x 1-1/4" Pan Head Machine Screws
1-3/4" (44mm) Door: Packed with device
Others: As Ordered
(2 Studs Toward Lock Edge).
Cylinder Housing
Assembly
This instruction manual includes wiring instructions
for E.T.C. with either Fail Safe or Fail Secure Control
Function or Fail Safe or Fail Secure Control Function
and Security Monitor (SM). Both these configurations
include the ElectroLynx
®
hinge connector system.
To Next Page
Need help?
General
