Assa Abloy ADAMS RITE 4300 Series User Manual

1 80-0180-418, Rev D
4600 Heavy Duty Designer Deadlatch Handles With
4300, 4500, and 4900 Series Deadlatches
Installation Instructions
TABLE OF CONTENTS
Tools and Equipment Needed ........................................................................................................ 2
Preparing the Stile ........................................................................................................................... 2
Offsetting the Escutcheon for 31/32” [24.61 mm] and 1-1/8” [28.58 mm] Backset ........................ 4
Optional Monitoring Switch ............................................................................................................. 4
Installing Trim to Stile ...................................................................................................................... 5
Installing the Handle ........................................................................................................................ 6
Determining and Changing the Handing Configuration .................................................................. 7
Changing the Handing of the 4581 Cam Disc................................................................................. 7
Phoenix, AZ
Tel: 1-800-872-3267
Mon-Fri: 6:00am - 4:00pm PDT
Fax: 1-800-232-7329
www.adamsrite.com

Assa Abloy ADAMS RITE 4300 Series Specifications

General

Voltage	12/24 VDC
Material	Steel
Door Thickness	1-3/4"
Backset	2-3/4"
Function	Electrified, various functions available (e.g., fail secure, fail safe)

Summary

Tools and Equipment Needed

Preparing the Stile

Details steps for preparing the door stile for installation of the deadlatch.

Offsetting the Escutcheon for 31/32" [24.61 mm] and 1-1/8" [28.58 mm] Backset

Optional Monitoring Switch

Information regarding the internally mounted switch for monitored trim.

Installing Trim to Stile

Installing the Handle

Step-by-step instructions for attaching the door handle to the trim.

Determining and Changing the Handing Configuration

Changing the Handing of the 4581 Cam Disc

Procedure for reversing the handing of the 4581 cam disc.