Need help?Do you have a question about the Assa Abloy ANYKEY and is the answer not in the manual?
General| Brand | Assa Abloy |
|---|---|
| Model | ANYKEY |
| Category | Door locks |
| Language | English |
Details the purpose and basic functionalities of the biometric access control system.
Explains the procedure for reading fingerprints on the biometric sensor.
Defines different fingerprint authorization types: Master, Cancel, and User.
Explains visual and audible signals indicating system status and actions.
Defines key terms like 'Activate' and 'Deactivate' for door handle operation.
Guides on how to test the deactivation and activation of the door handle.
Overview of the programming process, emphasizing sequential steps and time limits.
Explains user capacity, master/cancel finger authorisation, and release modes.
Provides advice on finger preparation for optimal fingerprint reading.
Describes the signals indicating a successful programming step.
Explains the signals for interrupted programming actions due to time limits.
Details signals prompting a retry when a fingerprint is not read correctly.
Illustrates the recommended finger assignments for different authorization roles.
Initiates the programming sequence for the master finger.
Details the process of reading the primary master fingerprint.
Important note regarding saving the master finger if programming is terminated.
Initiates the programming sequence for the cancel finger.
Details the process of reading the primary cancel fingerprint.
Note on saving the cancel finger if programming is terminated.
Defines temporary and continuous release authorization for user fingerprints.
Initiates the programming sequence for user fingers.
Details the process of reading the primary user fingerprint.
Initiates the sequence to assign permanent release authorization.
Registers the user fingerprint to receive permanent release.
Details the process for cancelling a single user fingerprint.
Important note that both user and substitute fingers are cancelled together.
Warning about security risks if cancellation is not performed correctly.
Information that master and cancel fingers remain stored after user cancellation.
Note that cancel and substitute cancel fingers are cancelled together.
Warning about needing to immediately re-register a cancel finger.
Note that master and substitute master fingers are cancelled together.
Warning about security risks and the need to re-register a master finger.
Warning about security risks and the need to immediately re-register a master finger.
Security warning about programming the Master-Code after reset.
Detailed steps for dismantling, resetting, and reassembling the fitting.
Troubleshooting tips if the fitting does not react to the reset procedure.
Details the various functions and behaviors of the system.
Explains system behavior when an unauthorized finger is presented.
Describes the system's lockout period after invalid access attempts.
Defines temporary and permanent release modes for door access.
Instructions for unlocking the door for a short, timed period.
Instructions for unlocking the door for an indefinite period.
Procedure to deactivate permanent door release mode.
Describes LED indicators for a fully charged battery.
Details LED indicators for a low battery charge.
Describes indications when the batteries are completely depleted.
Explains using a key for emergency door opening.
Instructions for using an external power source for emergency opening.
Warning about the risks of short-circuiting the battery during emergency power connection.
Instructions on how to clean the fitting without causing damage.
Instructions on how to access the battery compartment.
Cautionary advice regarding handling the decorative housing during battery change.
Warnings about incorrect battery insertion and system damage.
Lists key technical data like voltage, temperature, and dimensions.
Template for recording master and cancel finger assignments.
To Next Page
