Programming instructions
D0044508 Seite 51
3. Reading in the substitute master finger:
(
" &'
beep lights up flashes
Draw your substitute master finger over the sensor
You will hear an audible signal.
lights up.
flashes.
(
" &'
beep lights up flashes
Draw your substitute master finger over the sensor
You will hear an audible signal.
lights up.
flashes.
(
" &+'
beep lights up flashes 2x
Draw your substitute master finger over the sensor
You will hear an audible signal.
lights up.
flashes twice.
Afterwards the displays will be dark.
The master fingers and the substitute master fingers remain stored.
The next step is to program the cancel finger.
Q The new master finger and the new substitute master finger are now active.
Q The external door handle is deactivated.
Q Use the master finger or substitute master finger for the next programming steps.
To Next Page
Loading...
