Programming instructions
D0044508 Seite 59
2.8 Cancelling cancel finger
Notice
You always cancel the programmed cancel finger and also the programmed substitute cancel finger in
one operation. When you do this, it does not matter whether you use the cancel finger or the substitute
cancel finger to cancel.
After the cancel operation:
The next finger that you read in automatically becomes the cancel finger!
Read a new cancel finger in immediately!
1. Begin cancel operation:
" &'
beep flashes
Draw the cancel finger over the sensor.
You will hear an audible signal.
flashes for a few seconds.
2. Carry out cancellation operation:
" &'
beep flashes
Draw the cancel finger over the sensor.
You will hear an audible signal.
flashes for a few seconds.
" &+'
beep flashes 4x
Draw the cancel finger over the sensor.
You will hear an audible signal.
flashes 4 times.
Q The cancel finger is cancelled.
Caution
The next finger that you read in automatically becomes the cancel finger!
Read a new cancel finger in immediately!
You can read how to proceed in Chap. 2.5 on Page 52.