EasyManua.ls Logo

Assa Abloy ANYKEY - Operating the ANYKEY System; System Functions Overview; Behavior with Unauthorized Fingers; Cut-off Time After Invalid Attempts

Assa Abloy ANYKEY
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating instructions
D0044508 Seite 63
4 Operating instructions
4.1 Functions
4.1.1 Finger without access authorisation -
If you draw a finger without access authorisation over the reader, the external door handle/knob remains
deactivated. You cannot open the door.
" 
beeeep lights up
If you draw an unknown finger over the sensor:
You will hear a long audible signal.
lights up.
The cut-off time starts now (Chap. 4.1.2)
4.1.2 Cut-off time
After an invalid attempt the fitting remains blocked.
The cut-off time initially lasts for 2 secs.
After the 3rd invalid attempt the cut-off time increases continuously up to a max. of 4 minutes.
" 
beep 5x lights up
During the cut-off time the fitting is blocked for any use.
At each usage attempt:
You will hear several audible signals.
lights up.
" 
beep flashes 2x lights up
After expiry of the cut-off time the fitting is switched to release.
You will hear 2 audible signals.
lights up briefly.

Other manuals for Assa Abloy ANYKEY

Related product manuals