Assa Abloy ANYKEY - System Signaling and Feedback; Correct Action Confirmation; Interrupted Action Signals; Finger Read Error Prompt

Programming instructions
D0044508 Seite 47
2.2 Signalling
2.2.1 Correct action
" 
beep lights up
A correct action is confirmed by:
An audible signal and
 lights up.
2.2.2 Action interrupted
" 
beeeep lights up
If an action is interrupted (e.g. for exceeding the time)
You will hear a long audible signal and
 lights up.
2.2.3 Finger not correctly read in - request to repeat
" 
beep 3 times flashes 3 times
If a finger is not correctly read in:
You will hear 3 audible signals and
 ( flashes 3 times
Repeat the process until the programming step is confirmed as correct.