Programming instructions
D0044508 Seite 53
3. Reading in the substitute cancel finger:
*
" &'
beep lights up flashes
Draw your substitute cancel finger over the sensor
You will hear an audible signal.
lights up.
flashes.
*
" &'
beep lights up flashes
Draw your substitute cancel finger over the sensor
You will hear an audible signal.
lights up.
flashes.
*
" &+'
beep lights up flashes 2x
Draw your substitute cancel finger over the sensor
You will hear an audible signal.
lights up.
flashes twice.
Afterwards the displays will be dark.
The cancel fingers and the substitute cancel fingers remain stored.