Assa Abloy ANYKEY - Registering the Substitute User Finger

Programming instructions
D0044508 Seite 55
3. Step: Reading in the substitute user finger:
)
"  &'
beep lights up flashes
Draw your substitute user finger over the sensor
You will hear an audible signal.
 lights up.
 flashes.
)
"  &'
beep lights up flashes
Draw your substitute user finger over the sensor
You will hear an audible signal.
 lights up.
 flashes.
)
"  &+'
beep lights up flashes 2x
Draw your substitute user finger over the sensor
You will hear an audible signal.
 lights up.
 flashes twice.

Afterwards the displays will be dark.
The user fingers and the substitute user fingers remain stored.
Q The new user finger and the new substitute user finger with authorisation for temporary release are now active.