Assa Abloy Emtek EMPowered User Manual

16
Factory Settings
When lock is reset to factory defaults, all User Codes (including the Master PIN Code*)
are deleted and all programming features are reset to original default settings (see
below).
1. Remove battery cover and batteries.
2. Remove the interior escutcheon to access the reset button.
3. The reset button (see page 8, Step 5) is located beside the PCB cable connector.
4. While pressing the reset button (Minimum of 3 seconds) reinstall batteries.
Release reset button.
5. Replace battery cover.
Upon reset, Master PIN Code creation is the only option available and must be
performed prior to any other programming of the lock.
Factory Settings
Settings
Resetting Lock to Factory Default
Master PIN Code
Registration required*
Automatic Re-lock Disabled
Inside Indicator Light Disabled (O)
One Touch Locking Enabled
Volume Setting Enable (Low)
Language Setting English
Lockout Mode Disabled
Automatic Re-lock Time 30 Seconds
Wrong Code Entry Limit 5 Times
Shutdown Time 60 Seconds
*The Master PIN Code must be registered prior to any other programming of the lock.

Assa Abloy Emtek EMPowered Specifications

General

Brand	Assa Abloy
Model	Emtek EMPowered
Category	Keypad
Language	English