Assa Abloy LCU9101 User Manual

LCU9101
One-door control unit
Innehåll
Introduction.............................................................. 3
Compatible accessories............................................. 3
Motor lock..................................................................... 3
Readers........................................................................ 3
LCU9101 ...................................................................4
LCU9101 with relay board......................................... 5
Description of the board .................................................... 6
Indications....................................................................... 7
Settings with DIP switches ................................................. 8
DIP1 Telnet................................................................... 8
DIP2 Initiate motor lock .................................................. 8
DIP3 Balanced door monitor switch .................................. 8
DIP4 Fixed IP 192.168.1.250 ........................................... 8
DIP6 Master reset and test mode ..................................... 8
Installation ............................................................... 9
Installation Relay board DAC400RC64.................................. 9
Jumper links................................................................ 10
Terminal blocks ........................................................... 11
Initiating motor lock ..................................................... 13
Connection of accessories ................................................ 14
IG559101931C.doc

Assa Abloy LCU9101 Specifications

General

Brand	Assa Abloy
Model	LCU9101
Category	Control Unit
Language	English

Summary

LCU9101 Hardware and Settings

LED Indications

Describes the meaning of various LEDs on the board for status and diagnostics.

DIP Switch Settings

Details the function of each DIP switch (DIP1-DIP6) for configuration.

Installation and Wiring

Relay Board Installation

Terminal Block Connections

Identifies and explains the purpose of various terminal blocks on the LCU9101.

Motor Lock Initiation

Guides through the process of initiating motor locks with the LCU9101.

Accessory Connections

Direct Motor Lock Wiring

PoE Powering

Configuration

Automatic Configuration

Describes the recommended automatic configuration method using DHCP.

Configuration Checklist

Manual Configuration

USB Driver Installation

Terminal Configuration

Configuration via Terminal Software

Explains using the "Setup Wizard" and menu options for configuration.

Terminal Commands

Setup Command

Network Configuration Commands

Key Handling

Diagram