Premium+ Alarm Kit
HSA6410
Installation · Programming · Operating
Keep this manual safe for reference and future maintenance
Introduction Contents
General System Overview
Thank you for choosing the Yale Wireless Alarm System.
This simple to install system has been designed with the
user in mind.
No connections
All the components are self contained and no connections
are needed between the panels. There is no need to
damage the home decor, lift carpets or run cables.
Number of devices
You can install up to 20 devices in the system. As well as
extra door/window contacts, PIR motion detectors and
smoke detectors, you can add keyfob remote controls and
keypads for added control convenience.
Long battery life
There is no need to wire into the mains supply or seek
the services of a qualified electrician. The control panel is
powered by a plug supply and all other components are
powered by battery (all batteries included).
Batteries operate for 2 years or more before they need
changing*. Regular testing and battery changes (when
notified by the system) will ensure reliability and peace of
mind. Please note that alkaline batteries must be used as
replacements.
*Depending on usage.
Tamper proof system
The security accessories, control panel and external siren
are ‘tamper’ protected. Any unauthorised tampering with
these items will result in an alarm. This feature can be
turned off by the user when a battery change is required.
Take care of your safety
Display extreme caution when using ladders or steps,
please follow manufacturer’s instructions.
Be careful when using hand and power tools and follow
the manufacturer’s guidelines when using them. Take care
that the correct tools are used. Wear goggles or protective
clothing where required.
The external Siren is extremely loud, please ensure you
replace the cover and retreat to a safe distance before
testing.
Caution
The dialling facilities must only be used with persons who
have consented to being contacted by the system.
The system is not to be used to make 999 emergency
calls directly. Yale do not hold responsibility for any actions
taken by emergency services for incorrect use of the
dialling facility.
Information and illustrations are subject to change within this
document. Yale reserves the right to alter the specification and
product design at anytime without notice. Yale® is a registered
trademark. © 2017 ASSA ABLOY. All rights reserved.
Contents
1 Location planning 2
2 Unpack all the parts 4
3 First Time Easy Install 6
4 Mounting alarm devices 9
5 Control Panel Menu System in Detail 12
6 Using the System 18
Adding and using Accessories 20
Changing the batteries 22
Troubleshooting 24
Specifications 26
Recommended Installation Sequence
We recommend you follow the simple install
sequence, headings numbered 1-6.
To Next Page
Need help?
General
