EasyManuals Logo

Assa Abloy Yale YDD424A User Manual

Assa Abloy Yale YDD424A
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
16. Internal Forced Lock
15. External Forced Lock
User Guide
Fingerprint / PIN Code / Key
YDD424A
23. Master Mode
17. Alarm
18. 3-minute Lock Out Feature
19. Unlocking Door with Fake Code
Intrusion Alarm :
The alarm goes off when someone forces the door open.
For example, In case of an intrusion by opening a gap
in the door while the door is locked.
Broken Alarm :
The alarm sounds when the front part is completely
separated from the main set. For example,
forced removal of external product (front body).
To turn off Alarm
There is no limitation for
digits of Fake Pin Code.
To Release 3-minute Lock Out
If an invalid user code, fingerprint is entered five(5) times in a row,
lock out mode is activated and all buttons
on the front body are not activated for three minutes.
OR
Enter the User Code
and Fake Code
Press the Open/Close button.
Open the door with mechanical key.
Press button.
Enter the registered User Code.
Scan the registered fingerprint.
Press and hold the O/C Button for 5seconds.
Palm
touch
Palm
touch
U
PIN CODE
Enter the Fake Code
and User Code
U
PIN CODE
20. Power supply
21. Emergency power supply for discharged batteries
Contact 9V
battery
Palm
touch
Enter the User Code
and Plam touch
U
PIN CODE
One-on-one real life size
1.5V(LR6) Alkaline AA Battery
The product uses four 1.5V
Alkaline AA batteries. They may
sustain 1 year if used 10 times a
day.(Users are advised to use
authentic Alkaline batteries.)
Do not install the digital door lock in an outdoor environment.
Do not attempt to disassemble the digital door lock by your self.
By doing so, you may get an electronic shock and damage the product.
Do not use force with a tool onto the product.
Make sure to lock the door tight when you go out.
Be careful not to hit the handle as it may cause injuries.
Do not use water and any type of solvent to clean the product
such as gasoline or benzene as they can cause damage to
electronic circuit, deterioration and or paint peel-off.
It is recommended to change User Code on a regular basis.
In manual lock mode, make sure to double check
whether the door is securely locked.
When External Forced lock is set and unlock the door,
the alarm will be activated.
Do not use rechargeable batteries.
Only alkaline batteries are recommended.
Make sure to follow the above instructions to avoid any injuries.
It cannot be guaranteed in a special conditions & environment such as
water condensation, seaside.
Master mode is a mode in which only the administrator can set the door lock and provide
access to other users. 100ea user passwords, 100ea fingerprint and individual
registration
and deletion of one-time passwords enable efficient management of visitors.
Change
Mode
New
Again
Switch to master mode (from normal mode)
PIN CODE
U
PIN CODE
M
PIN CODE
M
Change
Mode
New
Again
Switch to normal mode (from master mode)
PIN CODE
U
PIN CODE
U
OR
Registr
-ation
New
Again
Master Pin Code Change
PIN CODE
M
PIN CODE
M
PIN CODE
M
Delete
OR
Registr
-ation
User Code
PIN CODE
U
UN
OR
UN
PIN CODE
M
Up to 100EA
Only 1EA
Delete
OR
Registr
-ation
Fingerprint
UN
OR
UN
PIN CODE
M
Up to 100EA
Delete
Registr
-ation
Onetime Code
OR
OR
PIN CODE
M
PIN CODE
M
PIN CODE
O
Only 1EA, Automatically deleted after use
Langu
-age
Setting
Language Change
OR
OR
OR
OR
OR
Delete
Delete all credentials
PIN CODE
M
PIN CODE
M
PIN CODE
M
Registr
-ation
Bluetooth Setting (Yale Access App)
PIN CODE
M
Delete
Registr
-ation
Remote Controller
OR
OR
PIN CODE
M
Up to 5EA
UN
UN
Button
SET
Delete
Registr
-ation
Home Network Controller
OR
OR
PIN CODE
M
roller
Cont
PIN CODE
M
PIN CODE
M
Korean
Chinese
English
Taiwanese
8times
Set up a new device in the app
14 (Registration process)
1
High
Low
Mute
Volume Control
PIN CODE
M
OR
OR
OR
Delete
Registr
-ation
Automatic Lock
PIN CODE
M
Continue / Complete
External Forced Lock Setting-Fingerprint
Scan with registered fingerprint and hold the fingerprint area
until you hear 3 beep sounds.
Releasing External Forced Lock Setting
When the door is unlocked from outside based upon proper
authentication, the External forced lock will be released.
Palm touch Enter the
User PIN Code
Enter the
button for 5 Sec.
External Forced Lock Setting – User Code
If you try to open a door with the manual thumb turn knob from inside when the Outside Forced Lock is set,
the alarm goes off.
If the Inside Forced Lock is set, any attempt to open a door from outside whether it’s be a Fingerprint or
code won’t work.
Press Open/Close button
for 3 seconds until
you hear “pik” beep.
Method 1 :
Press Open/Close
button for 3 seconds
until you hear
“pik” beep.
Method 2 :
Turn manual
thumb turn knob.
Setting
‘ 3 ’
Seconds
Release
‘ 3 ’
Seconds
Turn it
OR
OR
ISL-1857-00-022
PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed
without prior notice for performance and quality improvement.
Packaging of this product can be recycled.
You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE
OR RECYCLING PROGRAM.
User Slot Number should be 2 digits.
like ‘01’ … ‘99’ and ‘00’: Location of 100th user slot must be assigned "00" instead of "100".
22. Code Chart
Duplicate if necessary
PIN Code Management(Up to 100 Users.)
Do not install the digital door
lock in an outdoor environment.
24. Important notes
Do not attempt to disassemble
the digital door lock by yourself.
Do not spray water directly
or wipe with chemicals such as
benzene, gasoline or alcohol.
Do not use force with a tool
onto the product.
When using, remember that
someone else can see the
password.
Make sure to lock the door tight
when you go out.
25. Safety and Warning
Voice guidance function :
The lock provides voice guidance for user and it will be helpful to set up
lock’s features correctly.
All registered passwords and other credentials can be deleted at the time of mode change.
Please install(register) the network module when you want to use a remote control or home network.
Part of ASSA ABLOY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Assa Abloy Yale YDD424A and is the answer not in the manual?

Assa Abloy Yale YDD424A Specifications

General IconGeneral
BrandAssa Abloy
ModelYale YDD424A
CategoryLocks
LanguageEnglish

Related product manuals