Assa Abloy ELECTRIC LOCK User Manual

© Copyright, 1999, all rights reserved • Securitron Magnalock Corp., 550 Vista Blvd., Sparks NV 89434, USA
Tel: (775) 355-5625 • (800) MAGLOCK • Fax: (775) 355-5636 • Website: www.securitron.com
An ASSA ABLOY Group company
PN# 500-13200
Rev. A.1, 10/99
SECURITRON MODEL LCP SERIES ELECTRIC LOCK CONTROL PANEL
TABLE OF CONTENTS AND GUIDE TO THIS MANUAL
The LCP series is a powerful and versatile system with many standard and optional features.
You will generally use only some of these features so this table of contents includes a
description of the type of application that applies to each different section. By studying it first,
you can save considerable time by skipping over those parts of the manual that don't apply.
SECTION 1. DESCRIPTION --------------------------------------------------------------------Page 1
SECTION 1.1 GENERAL ------------------------------------------------------------------------Page 1
This section explains part numbering and allows you to determine your panel configuration.
SECTION 1.2 PANEL POWER-----------------------------------------------------------------Page 1
SECTION 1.3 LOCK CONTROL---------------------------------------------------------------Page 2
SECTION 1.4 MONITORING--------------------------------------------------------------------Page 2
SECTION 1.5 AUDIBLE ALARM AND ALARM RESET---------------------------------Page 3
The above 4 vital sections contain information that applies to any LCP series panel.
SECTION 2. OPTIONS ---------------------------------------------------------------------------Page 4
Once you have determined the options present or desired on your panel, read the
corresponding section below to learn the function and operation of the supplied option.
SECTION 2.1 SILENCE LATCH (OPTION "SL") -----------------------------------------Page 4
SECTION 2.2 EMERGENCY RELEASE (OPTION "PB")-------------------------------Page 4
SECTION 2.3 ADDITIONAL MONITORING LIGHTS (OPTION "AM")--------------Page 4
SECTION 2.4 SWITCH BYPASS KEYSWITCH ("KP1", "KP2" "MK1", "MK2")-Page 5
SECTION 2.5 MOMENTARY SWITCHES (OPTION "MOM")--------------------------Page 5
SECTION 2.6 HIGH VOLUME PUSH BUTTONS (OPTION "HT")--------------------Page 5
SECTION 3. BOARD TERMINAL DESCRIPTIONS --------------------------------------Page 6
This is a reference section. It starts with a drawing showing all terminals on the panel board
and then describes the meaning and function of each. Reading the section explains the
capabilities of the panel, but it's not necessary to complete an installation. As a reference,
the section is of great help in answering questions which arise or planning unusual uses.
SECTION 4. WIRING------------------------------------------------------------------------------Page 7
SECTION 4.1 POWER INPUT WIRING ------------------------------------------------------Page 7
The above section should be read for all installations.
SECTION 4.2 FAIL SAFE LOCKS ------------------------------------------------------------Page 9
If the locks you will be using are fail safe (secure when powered), this section should be
carefully read to determine the proper hookup. Figure 3 (Page 10) shows the several
different ways that fail safe locks may be connected to the panel.

Assa Abloy ELECTRIC LOCK Specifications

General

Brand	Assa Abloy
Model	ELECTRIC LOCK
Category	Locks
Language	English

Summary

1. DESCRIPTION

1.1 GENERAL

Explains part numbering and panel configuration details.

1.2 PANEL POWER

Details power supply requirements for the panel and connected locks.

1.3 LOCK CONTROL

Describes how toggle switches control locks and options for high traffic use.

1.4 MONITORING

Explains bicolor and yellow LEDs for zone status and violation conditions.

1.5 AUDIBLE ALARM AND ALARM RESET

Details the Sonalert function, violation latching, and manual reset procedures.

2. OPTIONS

2.1 SILENCE LATCH (OPTION "SL")

Explains how the silence latch button mutes the Sonalert during a violation.

2.2 EMERGENCY RELEASE (OPTION "PB")

Describes the push button for immediate release of all fail-safe locks.

2.3 ADDITIONAL MONITORING LIGHTS (OPTION "AM")

Covers the addition of yellow LEDs and pulsing Sonalert for status indication.

2.4 SWITCH BYPASS KEYSWITCH

Explains keyswitch bypass for security and different configurations.

2.5 MOMENTARY SWITCHES (OPTION "MOM")

Details the use of momentary switches instead of standard toggle switches.

2.6 HIGH VOLUME PUSH BUTTONS (OPTION "HT")

Describes push button replacements for toggles for high traffic applications.

3. BOARD TERMINAL DESCRIPTIONS

4. WIRING

4.1 POWER INPUT WIRING

Explains how to connect the DC power supply to the LCP board.

4.2 FAIL SAFE LOCKS

Details various methods for wiring fail-safe locks to the panel.

4.3 FAIL SECURE LOCKS

Details various methods for wiring fail-secure locks to the panel.

4.4 POWERED SWITCHING DEVICES AT THE DOORS

Explains wiring for powered devices like keypads or card readers at the door.

5. OPTION WIRING

5.1 SILENCE LATCH WIRING (OPTION "SL")

Shows field installation of the silence latch option using a relay.

5.2 EMERGENCY RELEASE WIRING (OPTION "PB")

Details field installation of the emergency release push button.

5.3 WIRING OF "AM" OPTION AND XDT BOARD

Explains wiring for AM option and XDT board for delayed egress applications.

5.4 SWITCH BYPASS WIRING (KP1/MK1/KP2/MK2)

Details wiring for switch bypass options for fail-safe and fail-secure locks.

6. USE OF MULTIPLE PANELS

6.1 “MASTER/SLAVE” PANELS (FOR FAIL SAFE LOCKS)

Describes wiring two or more panels for fail-safe lock control.

6.2 MULTIPLE PANEL FAIL SECURE WIRING

Details parallel wiring for fail-secure locks across multiple panels.

6.3 PANELS ALTERNATELY ENABLED

Explains wiring for panels used in alternate shift or access scenarios.

7. DOOR MONITORING (NO ELECTRIC LOCKS)