Associated Research 3130

To Next Page

HYAMP

III

Models 3130, 3140, 3145, 3160

SAFETY CHECKLIST

Survey the test station. Make sure it is safe & orderly.

Always keep unqualied/unauthorized personnel away from the test area.

Familiarize yourself with safety protocols in the event of a problem.

Exercise caution and never touch products or connections during a test.

Train operators. Never touch clips directly and always connect the return lead rst.

You should always know when a test is being performed.

WARNING: THIS GUIDE WAS CREATED FOR OPERATORS HAVING SOME FAMILIARITY WITH ELECTRICAL SAFETY

TESTING. AN ELECTRICAL SAFETY TESTER PRODUCES VOLTAGES AND CURRENTS THAT CAN CAUSE HARMFUL

OR FATAL ELECTRIC SHOCK. TO PREVENT ACCIDENTAL INJURY OR DEATH, THESE SAFETY PROCEDURES MUST

BE STRICTLY OBSERVED WHEN HANDLING AND USING A TEST INSTRUMENT. CONTACT US AT

INFO@ARISAFETY.COM FOR MORE INFO ON HOW TO GET TRAINED ON ELECTRICAL SAFETY TESTING.

Quick Start Guide

Need help?

Do you have a question about the Associated Research 3130 and is the answer not in the manual?

Summary

Safety Checklist

Instrument Setup

Edit System Parameters

Change Test Settings

Test Connection

3130 Set Up

Connects the HYAMP III to the DUT for the 3130 model.

3140;3145;3160 Set Up

Connects the HYAMP III to the DUT for 3140/3145/3160 models.

Hypot III Interconnection

Interconnection of HYAMP III to HYPOT III and Connection to a Device Under Test

Connects HYAMP III to HYPOT III and DUT for system testing.