For the following models:
8204/8254
8206/8256
8207/8257
SafetyCHECKLIST
KeeP unqualified/unauthorized personnel away from test area
arrange test stations in a safe and orderly manner
never touch products or connections during a test
StOP the test first in the event of a problem
never perform a ground bond test on energized circuitry or equipment
be Sure to always connect the return test lead first
handle test clips by insulation only, never touch clips directly
WARNING: THIS GUIDE WAS CREATED FOR
OPERATORS HAVING SOME FAMILIARITY WITH
ELECTRICAL SAFETY TESTING. AN ELECTRICAL SAFETY
TESTER PRODUCES VOLTAGES AND CURRENTS THAT
CAN CAUSE HARMFUL OR FATAL ELECTRIC SHOCK.
TO PREVENT ACCIDENTAL INJURY OR DEATH, THESE
SAFETY PROCEDURES MUST BE STRICTLY OBSERVED
WHEN HANDLING AND USING A TEST INSTRUMENT.
To Next Page
Need help?
General
