Need help?Do you have a question about the Associated Research HYAMP III 3140 and is the answer not in the manual?
General| Frequency Range | 50/60 Hz |
|---|---|
| Display | LCD |
| AC Hipot Output Voltage | 0-5000 V |
| AC Hipot Output Current | 0 - 40 mA AC |
| Safety Standards | IEC 61010-1 |
Details the instrument's warranty, registration, and extended warranty program.
Explains safety symbols and defines technical terms used in the manual.
Emphasizes reviewing safety markings and instructions before operating the instrument.
Guidelines for safe test station setup and operator responsibilities.
Instructions for safely unpacking, inspecting, and installing the instrument.
Lists the detailed functional specifications for the HYAMP III Model 3140.
Lists the detailed functional specifications for the HYAMP III Model 3160.
Identifies and describes the front panel controls for both 3140 and 3160 models.
Identifies and describes the rear panel controls and connectors for both models.
Describes instrument power-up, menus, and system setup procedures.
Guides on setting up and configuring individual test parameters.
Steps for executing tests, interpreting results, and handling error messages.
Details using rear panel connectors for remote control and monitoring.
Illustrates and describes integrating HYAMP III with a HYPOT III for testing.
Process for verifying the proper functioning of the instrument's failure detection circuits.
Detailed steps for calibrating the instrument to maintain accuracy.
Detailed procedures for calibrating AC Current and AC Voltage for both models.
A list of replacement parts for the 3140 HYAMP III instrument.
A list of replacement parts for the 3160 HYAMP III instrument.
To Next Page
