ASTEC KPI-JCI User Manual

Vertical Shaft Impactor
11
Lubricants and Fluids
Factory Fill Lubricants
The lubricants listed below in bold type are
factory ll lubricants. Other lubricants may
be used, provided they meet the lubrication
requirements specied.
Cold weather lubricants are listed after the
factory ll, see Cold Weather Startup for
more information.
Bearings and Hydra-Arm
• PhilubeHighTempEP2
Hydra-Arm
• Hydrex MV60
• Hydrex MV22
For extremely cold temperatures -58 degrees
F and below (-50 degrees C), Hydrex MV 22 is
recommended. When using an ISO 32 hydraulic
oil with a viscosity index less than 100, the
temperature limit is 10 degree F above zero.
Oil Circulating System
• Mobilgear 600 XP 68

ASTEC KPI-JCI Specifications

General

Brand	ASTEC
Model	KPI-JCI
Category	Construction Equipment
Language	English