ASTEC KPI-JCI User Manual

Vertical Shaft Impactor 13
Orientation is determined by
standing at the opening of the
Vertical Shaft Impactor looking
in the direction of material ow.
Introduction to the Vertical Shaft
Impactor
The feed end of the Vertical
Shaft Impactor receives the
material to be crushed and the
discharge end discharges the
crushed material.
References to the right hand
and/or left hand side will be as
shown below.
Material ow
Counterclockwise rotation

ASTEC KPI-JCI Specifications

General

Brand	ASTEC
Model	KPI-JCI
Category	Construction Equipment
Language	English