46
OK
Adjust
Preoperation Checklist
The preoperational check should be performed
any time the equipment is moved to a new site, or
if it has been in storage for an extended period.
Check each component to insure that it is in
operational condition. This check should include,
but not be limited to the following items.
AdjustOK
PREOPERATIONALCHECKS
1. Sheet Metal/Appearance/Paint
2. Circulating Oil System
a. All ttings greased
b. Oil reservoir level (1” below top of
site glass)
c. Oil lters
d. Hoses and ttings
e. Oil breathers clean and free of
blockage
3. V-belts tight
4. Grease lube points
5. Inspection doors closed
6. Lid hold-down wedges installed in lid
7. All liners in place and secure.
8. General
a. Operator’s manual on unit
b. Decals in place and readable
c. Safety guards in place
To Next Page
Loading...
Need help?
General
