ASTER TECHNOLOGIES FT-650 - Page 7

Ast
er
T
c
n
olog
ies
e
h
HOW TO DO BATCHER SETTINGS:
KEY TO BE PRESSED DISPLAY
Menu View settings
The display scrolls through all the settings of meter and
finally comes to --
CHANGE SETTINGS
Menu CH1 SETTINGS
Menu
CH1 BATCH QTY (and th en
previously set value)
Set required batch quantity by using scroll & select ch key
Menu QUIT
8
Menu QUIT
Menu EXIT
HOW TO RESET THE TOTALISER READING:
By using this function we can reset various values such as Totaliser
reading, batch quantity, batch count er etc.
KEY TO BE PRESSED DISPLAY
Scroll & select ch simultaneously PASSWORD :000
Enter the password 456 using Scroll & Select ch keys.
Menu CLR CH1 TOT? NO
To reset the total press Select ch key CLR CH1 TOT? YES
Menu CLR CH1 BATCH? NO
CLR CH1 BATCH? YES
Menu CLR CH1 CNTR? NO
CLR CH1 CNTR? YES
Menu Exit
To reset the total press Select ch key
To reset the total press Select ch key
FLOW COMPARATOR MODE:
This mode is ideal for Reverse Osmosis systems. Here the
meter is supplied with 2 sensors (one for permeate line and the
other for reject or feed line). The meter displays both the flow
rates and also calculates the % RECOVERY. One could set the relay
at a particular recovery % and relay would get energized
whenever the system recovery crosses the set point.