Astralpool CONTROL BASIC - Page 7

Code 0000137847 Rev 1.0
6
Alarm
Display
Actions to do
OFA First Alarm (time >70%)
OFA Alarm
- Push Enter Key to reset
OFA Second Alarm (time =100%)
OFA STOP
- Push Enter Key to reset
Flow Rate
Flow
- Restore Flow Rate
System Error
Parameter Error
- Press Enter Key to replace Default parameter
- Destroy Unit
Calibration Funciont
Error 7 ph Error 4 ph
Error 465 mV
- Restore Probe or Buffer
solution and repeat calibration function
To restore Default parameters run Following steps:
• Power off Pool Basic unit
• Keep pressing both buttons simultaneously
and
To turn on the system Basic.
• The system will show Default No
• Press
for Default Yes
• Press
to restore Default parameters.
Default parameters:
• Language = UK
• Set Point value= 7,4 pH; 750mV (Rx)
• Dosing Method = Acid; Low (Rx)
• Time OFA = OFF
• Calibration = 7/4 (2 point); 465mV (Rx)
• Flow Input= OFF
www.PiscineFuori-Terra.com